3 Steps to Selecting the Best Paint For Cabinet Painting
Cabinet painting is often confused with cabinet paneling, which is an entirely different kind of woodworking project. A cabinet painting, a single large painting, usually no smaller than two feet at either side and often far smaller still, is used for displays of full-length, realistically painted scenes or landscapes in a normally scaled miniature, rather than life-sized. If the room to be painted is large enough, using full-scale miniature painting on panels is certainly a good way to achieve the effect. For those with a very small space though, painting one large panel by itself can be a daunting task.
The best solution for those wishing to use cabinet painting as a way of redoing their existing cabinets is to carry out the refinishing work separately. This is best carried out before re-painted cabinets are installed so that all the pieces of existing furniture can be left in their existing positions. Painting is often best carried out on unfinished surfaces so that all the edges of the new surface can be sanded before the first layer is applied. It’s very important however that any sanding done is carefully done away from the edges of the picture surface so that all the wood grain of the existing cabinets will be retained. Any ridges or dips in the wood grain of the cabinets can be corrected later once the coat is on, or at least before it becomes too late.
Painting on new surfaces also gives you the opportunity to create designs in any style you wish. It is often the case that a homeowner begins with a new wall color and then decorates around this with new fixtures and fittings. Alternatively, you could choose to paint the walls a neutral shade and then add accessories, such as paintings, through the use of stencils. These techniques give you the opportunity to create very individualized pictures which will give your kitchen remodeling projects a stylish new look. When the time comes to apply the paint, it’s always best to start with a clean palette knife so that you can simply wipe off any excess paint from the walls.
Another factor to take into consideration when choosing cabinet painting products is the preparation of the surfaces to be painted. Many types of paints have a built in water-repellent layer so that when they are applied they will not bleed through the top layers of cabinets. If the surface to be painted has not been primed before being used as a surface for the paint, you need to prime it by applying a layer of high quality paint that has been spray coated with an electrostatic charge to prevent it wearing away from the surface while it cures.
One thing many homeowners do not consider is that the type of paint they are using to cover their cabinets may affect the finish of the furniture. For instance, chipboard cabinetry which has been sealed can last for decades if it is properly preserved. If homeowners begin to refinish their cabinets after they have been painted, the finish will not last as long. In fact, the longer the paint stays on the surface of the cabinets, the lower the quality of the finish. If you are looking for a low maintenance cabinet painting solution, homeowners should definitely consider using chipboard instead of regular plywood or laminate.
The final factor to take into consideration when choosing cabinet painting products is the finish that you will be applying. Many homeowners prefer a matte satin finish because it looks sleek and sophisticated. However, if you do choose a matte finish, make sure to prime it with a high quality paint just as if you were applying any other type of finish. You may also want to prime the surface of the cabinets before you actually begin to apply the color. If you do not prime the surface, you will run the risk of bonding the two surfaces together if the two do not match up well. For more details on this visit www.louisvillecabinetrefinishingandrefacing.com.